6S 22.2V 8000mAh LiPo Drone Battery with 120C Burst Discharge and Smart BMS for FPV and Agricultural UAV
| Configuration: | 6S1P | Burst Discharge: | 120C (3 Seconds) |
| Continuous Discharge: | 60C | Nominal Voltage: | 22.2V |
| Capacity: | 8000mAh | Battery Weight: | Approx. 980g |
| High Light: | 6S 8000mAh Long Endurance Drone Battery,Smart BMS Fast Charging LiPo Pack,120C High Discharge FPV Racing Battery |
||
The Maysa MS-6S8000-120C is a premium 6S 22.2V 8000mAh LiPo drone battery engineered for maximum flight endurance and high-discharge performance. Equipped with an intelligent Smart BMS, it supports 5C fast charging and delivers an impressive 120C burst discharge rate, making it an ideal power solution for FPV racing drones, agricultural spraying UAVs, and professional aerial mapping platforms. With UN38.3, CE, and RoHS certifications, this battery meets international safety and transport standards for global export.
With 8000mAh nominal capacity, this battery provides 30-40% longer flight time compared to standard 5000-6000mAh packs. A single charge supports up to 35 minutes of hovering or 25 minutes of aggressive FPV racing, significantly reducing battery swap frequency during critical missions. Ideal for agricultural spraying drones covering large farmlands and long-range mapping operations.
Unlike basic drone batteries, the MS-6S8000-120C integrates a dedicated Smart Battery Management System that continuously monitors individual cell voltage, current, and temperature. Automatic protection against overcharge, over-discharge, over-current, short circuit, and thermal runaway ensures maximum safety during high-stress operations. Real-time data output via balance lead enables flight controller integration for in-flight battery health monitoring.
Delivering 480A instantaneous burst current at 120C rating, this battery handles aggressive throttle punches, rapid ascents, and sudden load changes without voltage sag. 60C continuous discharge (480A sustained) supports heavy-lift agricultural drones carrying 10L+ spray tanks. Stable voltage output throughout the discharge curve ensures consistent motor performance from takeoff to landing.
Supports 5C rapid charging (up to 40A), allowing a full charge in approximately 12-15 minutes when paired with a compatible high-power balance charger. This dramatically reduces ground time between flights, enabling near-continuous operation for commercial drone service providers. Standard 1C charging remains available for routine battery maintenance and longevity optimization.
Pre-installed XT60 gold-plated connector ensures low-resistance, high-current transmission with minimal heat buildup. Compatible with most 6S FPV racing drones, agricultural UAV power distribution boards, and RC aircraft systems. JST-XH 7-pin balance lead supports all mainstream balance chargers on the market.
| Parameter | Specification |
|---|---|
| Battery Type | LiPo (Lithium Polymer) |
| Configuration | 6S1P |
| Nominal Voltage | 22.2V |
| Capacity | 8000mAh |
| Continuous Discharge Rate | 60C (480A continuous) |
| Burst Discharge Rate | 120C (960A burst, 3 seconds) |
| Charging Rate | 1C standard / 5C fast charging supported |
| Connector Type | XT60 (gold-plated) |
| Balance Connector | JST-XH 7-Pin |
| Battery Weight | Approx. 980g |
| Dimensions (L x W x H) | 160 x 54 x 45 mm |
| BMS Protection | Overcharge, Over-discharge, Over-current, Short Circuit, Temperature Protection |
| Cycle Life | 300+ Cycles (at 80% capacity retention) |
| Operating Temperature Range | -10C to 60C |
| Certification | CE, RoHS, UN38.3 |
- FPV Racing & Freestyle Drones - 120C burst for aggressive throttle response and instant power delivery during races
- Agricultural Spraying UAVs - 8000mAh capacity supports extended spraying missions over large farmland without mid-operation battery swaps
- Aerial Mapping & Surveying Drones - Stable voltage output ensures consistent flight performance for photogrammetry and LiDAR scanning
- Heavy-Lift Industrial Drones - 60C continuous discharge handles payloads up to 10kg for delivery and logistics applications
- RC Aircraft & Helicopters - Universal XT60 connector and standard 6S voltage compatible with most hobby-grade power systems
8000mAh capacity extends mission duration by 30-40% vs standard packs
5C fast charging delivers full charge in 12-15 minutes
Smart BMS with multi-layer protection prevents battery failures
CE, RoHS, UN38.3 certified for worry-free international shipping
Custom connector, capacity, labeling, and packaging upon request
Manufacturer-direct supply with competitive wholesale pricing and fast lead times
22.8V 6S 12000mAh Lipo Battery 200A RC FPV Drone Agriculture UAV Lithium Polymer Battery
一,Product Overview Our 6S 22.8V 12000mAh lithium polymer battery is assembled with Grade A raw lipo cells in 6S1P configuration, developed specifically for heavy-load agricultural plant protection drone, long-endurance FPV and industrial RC UAV.Featuring stable high-rate discharge performance, 200A ...
6S 22.2V Drone Battery Pack 6000mAh High Rate LCO Battery For RC Aircraft Industrial UAV
6S1P 22.2V 6000mAh high-performance LCO lithium polymer battery with 60C high discharge rate, operating temperature -20℃~+50℃, full OEM customizable, ideal for FPV racing drone, aerial survey UAV and fixed-wing RC aircraft. 1. Product Overview This HGB high-rate LCO LiPo battery is designed for FPV ...
30000mAh 22.2V 6S LiPo Battery LCO Aviation Battery Heavy Payload UAV Battery
Shop premium HGB 30000mAh 6S 22.2V high-rate lipo battery made of LCO lithium cobalt oxide, rechargeable drone battery pack designed for UAV & aircraft, customizable color, wide working temp -20℃~+50℃. Product Details high discharge rate lithium polymer battery with huge 30000mAh capacity, 6S1P cell ...
Cold Resistant 12S 44.4V 12000mAh LCO Drone Battery Pack 20C 532.8Wh For Survey UAV
12S1P 44.4V 12000mAh high-performance LCO drone battery with 20C discharge rate & 532.8Wh capacity, operating from -20℃ to +50℃, optional low-temp heating, full OEM customization for commercial UAV, crop spray drone and fixed-wing aircraft. 1. Product Overview This HGB industrial-grade LCO lithium ...
